Monthly Archives: January 2018

My first plan of what two sew over the course of two weeks has gone well, somewhat to my surprise. Historically, I've not been great at making a plan and executing it, as I get distracted along the way. By breaking it up into only a two week plan, it's a lot easier to stay focused as I can tell myself that I'll get to decide on my next project very soon.

 Updates

1. Made a muslin version of the Sunny dress. Good thing, too! It was very badly fitting, so I ended up doing some surgery on it to get it to fit. I made an IG story of the process, which you can check out on my story highlights here (http://instagram.com/ladyreed84).

Hacked but wearable Sunny Dress muslin
Hacked but wearable Sunny Dress muslin

2. Design Sunny Dress hack. Done! Although I confess that I didn't finish this till Wednesday, but I'm counting it close enough. :)

3. Design a 3D capsule wardrobe. I spend over an hour on this one, so I'm calling it complete. However, I realized after that hour that I had no idea what it meant to design it. Was I wanting to pick patterns? Was I working through shapes, silhouettes, etc.? I finally ended with a pile of sketches of things I want to make and I picked a few patterns that I'd probably start with to make those. I'm not limiting myself to these, as I want to make what I want, assuming it fits in one of the style categories. So, in the end, I'm calling it complete, but I'm not really sure how or what I accomplished. Effort for the win!

4. Pick 3D capsule wardrobe color palette. Done! I did this and I'm in love with it! I have lots of fabric in the blue, black, white, gray. However, my accent colors I have less of. Now I can do focused shopping and feel less wasteful about me purchases. Win, win!

5. Made two pairs of PJs for my hubby. He wears them all the time now, which is the best possible compliment!

Next Up

For the next two week, (which has already started and I'm just now getting to this) I'm going to have to go light on what I want to sew. Work is insane until the 24th, so I won't have a lot of time for bliss projects. I'll pick two things to work on and a couple things for if I have time.

1. Sew the Sunny Hack. It's designed and the pattern is ready, just cut and sew now!

2. Cut out the Seamwork Shelly leggings. I really like the gusset (panel?) for shaping and am hoping to get a great fit! I'm going to make these out of light gray poly jersey.

3. (IF TIME) Tape together the Ames jeans patterns. Due to have absolutely no time lately, I may bite the bullet and do PDF plotting for this one. We'll see...

 

 

For my first 3D capsule wardrobe (I've started thinking about it as a cube), I'm going with a cool winter color scheme that has touches of spring colors. I'm hoping to transition into spring nicely. The main colors are ones that I have quite a bit of in my stash, but the accent ones not as much. I hope to do very little buying for this and what I do will now be focused on this.

3D Wardrobe - Colors Winter/Spring 2018
3D Wardrobe - Colors Winter/Spring 2018

My main colors are: royal blue, gray, navy.

My neturals are black and white.

My accent colors are: green, cream, purple and berry pink.

The colors for a capsule wardrobe are selected by filling in three categores: neutrals, main color, accents. Anuschka Rees, author of The Curated Closet (which I haven't read yet, but have requested from the library), has an excellent description of this here, as well as list of example palettes here. For discussions that are more focused on fabrics, you can find more info from the Curvy Sewing Collective, here, or from Colette's Wardrobe Architect series, here.

The next step is to plan projects by pulling fabric and patterns. My favorite part!

In my last post, I talked about planning in 2 week chunks of time (usually called sprints, for us nerds). So this post is my plan for the next 2 weeks and what I'm going to sew.

1. Sew Sunny Dress

The Sunny Dress is up next. I've got it altered and ready for a wearable muslin. Because it's a knit dress, I could skip the muslin, but I have some concerns about the pattern and my alterations, so I'm going to do a muslin. I'll do more about all that in another post.

Friday Pattern Co. - Sunny Dress (PDF)
Friday Pattern Co. - Sunny Dress (PDF)

2. Design Sunny Dress Hack

Assuming that I get the Sunny dress to fit by next Monday or so, I'm going to start working on a hack for it. This is what I will actually submit for the #sewMyStyle2018. It's inspired by a Torrid dress, but I'm going to modify it so I can wear a bra with it. I doubt I'll have time to get it cut out even, but I want to at least have the pattern pieces ready to go.

Torrid Lattice Front Dress
Torrid Lattice Front Dress

3. Defining 3D Capsule Wardrobe (for 1 hour)

I want to identify items in my current wardrobe, me-made and RTW, that will work in the 3D capsule. If it doesn't, I'm going to give myself permission to donate it. I also want to start identifying gaps that my wardrobe has. This will be an ongoing process, but I'm going to commit to spend 1 hour on this.

4. 3D Capsule Wardrobe - Color Palette

I'm going to also start identifying colors for this capsule. I'm going to do a round up of good articles on wardrobe colors and define my own color palette. (This will actually be a prerequisite to getting my stash organized and tracked.)

5. Make my husband some PJ pants for his birthday

Ok, so this doesn't fit in any category of my planning exactly, but I have some TMNT and KU fabric (two of his favorite things) so I thought I'd work them up into PJs as his gift. I am the first to admit that I don't do selfless sewing very often, so if I don't make it to this, I reserve the right to go buy a gift card! 😀

Because I'm starting a little late with this one, I'm going to be short a day or two, but I think I can still get this done by Jan 13. Let the fun begin!

My goal this year is more intentionality in the sewing that I'm doing. I want to find more joy not only in the process, but in the finished results. I want to use my stash more and to buy fabric that will fit in and be used and loved quickly, not languish for long periods of time in boxes.

This kind of focus only happens as the result of planning, so planning, here I come! I actually enjoy planning, and, if I"m honest, I might enjoy it more than the doing. I love getting organized and lining things up. It's the follow-through and the finish that sometimes get away from me.

Knowing my weakness, I"m trying to plan this work in a way that is easy to see if I"m getting behind or if I need to change anything. A while back, I read a book called the 12 Week Year which is about getting results quickly and seeing change. There's a lot in the book in the process, but the gist of it is that deadlines should only be 2 weeks out and goals should only be 12 weeks out. The idea is to take what we do at the end of the year and do it every quarter. This way, we gain momentum by seeing goals accomplished quickly and are less likely to be derailed by unexpected things since we aren't planning things out as far.

So, to that end, I am planning my 1Q goals and plans, only going out to March 31. The last week of March I will review where I'm at and redo the planning for 2Q. I'm excited to see if this will be a momentum-builder into April sewing for Me-Made-May.

I'm going to assume my pace to be one garment every two weeks. I want to increase that next quarter to maybe 3 a month or more, but I'm trying to be realistic about my available time. 12 weeks divided into 2 week sprints (the term for short term goal deadlines) means I can sew 6 garments. Goals don't equal garments, though, so I will have more than 6 goals. It just means that every garment I sew has to fit into at least one of the goals I'm setting.

1Q Goals

  • Sew Sunny dress for #SewMyStyle2018
  • Sew Kalle shirt dress/tunic for #SewMyStyle2018
  • Sew a pair of well-fitting pants (without fly, to focus on fit)
  • Sew a pair of well-fitting jeans (using other pant for fit, to focus on construction)
  • Create a TNT for a basic knit shirt
  • Copy one ready-to-wear (RTW) shirt that I love, but can't wear anymore (starting from TNT pattern)
  • Build a workable 3D Capsule for every day wear that includes both RTW and me-made items
  • Identify items to make for the every day Capsule for future quarters
  • Blog/IG regularly about finished makes and processes
  • Identify fabric stash quantities and find way to track fabric use
  • Identify the fabric and notions to start learning bra making

Setting measurable goals only till March doesn't mean I can't think ahead or decide to do things further out than that. It just means that I'm going to commit to goals only until March and do a review then to see if I'm on track. I've also got some goals in mind for the whole year as well.

By-End-Of-Year Goals

  • Participate in Me-Made-May with at least 50% being me-made.
  • Do 10 of 12 of the #SewMyStyle2018 patterns (I reserve the right to take this down to 9 if I don't like any of the ones that come out later)
  • Participate in at least one photo challenge
  • Learn lingerie sewing to be able to make a bra and panty set
  • Wear 75% of what I make on a regular basis
  • Have a tried-and-true (TNT) pattern for each style in my 3D capsule wardrobe
  • Sew 4 (1/Q) selfless projects
  • Finish 4 (1/Q) WIPs

I'm so excited to be participating in #SewMyStyle2018, hosted by Jessica Lorraine. The January pattern is the Sunny Dress from Friday Pattern Co. I have finished taping the PDF and altering it for my size. If I were rating this pattern, so far I'd only be able to give it 2.5 or 3 out of 5. I'm not loving it.

Friday Pattern Co. - Sunny Dress (PDF)
Friday Pattern Co. - Sunny Dress (PDF)

First of all, sizing. It seems inclusive as it goes up to XXL, but that XXL size is much smaller than what I would expect. To be fair, this is a knit pattern, and how much negative ease is in the pattern, if any, differs per designer. The description of this is "body skimming without being too tight," but based on my measurements and the garment measurement, that would not have been the case. It would have been tight enough on my to be more along the lines of lumpy sausage! Not what I feel beautiful in. :-)

Second, the sizing chart isn't included in the PDF instructions. I had to go back to the website to check for sizing. Not world ending, but kind of an oversight. There was also not a legend the showed the cutting line styles for each size. Again, not huge, but it's handy to have that.

Taping went well. Marks were clear, and it all lined up nicely and was easy to cut and tape.

I'll talk more about the alterations I made in a second, but after I had it all cut out, I noticed a drafting issue on the bottom of the back piece. Nothing huge at all, but the angle where the hem and back meet was incorrect. If sewed as drafted, there would be a point in the back. Minor, but, IMO, shows an oversight. Below, you can see the pencil line I've added to remove the point. The hem line need to be at 90 degrees from the fold line and them smooth into the hem line.

There was a second mistake I noticed on the XXL size. The XXL line alternates a long dash line and shorter one. Halfway through the armhole, the line switches to the same dash as the XL line and continues in that dash through to the neck line. The line itself is correct, it simply uses the wrong dash pattern for a while. Not a huge thing, but I had a moment of , "Oh No!" when I was cutting because I thought I'd cut the wrong size out for a minute.

For the alterations, I basically redrafted the sides. I kept to the XXL size along the armholes and neckline, but from the underarm point down, it's a new line.

To find this line, I took my waist and hip measurements, divided them by four. Then, I measured from the fold line out toward the side seam and put a mark where that measurement fell. I did this on both the front and back piece and then measured the difference back to the XXL line. Adding the differences together, then dividing by two gave me the amount out from line to make my new line (the green line in the picture).

Grading/Altering Side Line
Grading/Altering Side Line - Front piece has new line in green

For example: my waist is 40 and I wanted a little looseness in it, so I did 10 1/2" out from the fold line. Measuring from that back to the XXL line, the front was a difference of 3/4" and the back was 1 1/4". That makes the total difference 2", so, dividing that by 2 the amount I needed to increase both the front and back at the waist was 1". I repeated the process for my hips, which was much less (I'm apple shaped) at only 13/16" needed on both pieces.

I made marks away from the line at those distances, on the back piece only, and then used a french curve to make a smooth line. After that, I simply flipped the back piece onto the front, keeping the underarm point matching and the fold line parallel. That allowed me trace the line from the back to the front.

By keeping the underarm point the same, I didn't have to alter the sleeves at all. I probably needed more room in the bust, but not having to adjust the sleeves is worth a little tightness.

At the hem, just a note, when widening the skirt, make sure to mark the new hem point straight out from the side. If you follow the hem up to the new side line it makes it shorter, and IMO, this dress doesn't need to be any shorter!

The shoulder seams are a different angle than I'm used to seeing, so I'm thinking about doing a wearable muslin to start with, especially, as I've basically redrafted the sides.

Pattern rating so far: 3/5

My plan for this year's sewing is revolving around idea I had called 3D Capsules. Many of us are familiar with capsule wardrobes. Essentially, you limit yourself to a handful of interchangeable options that you know will always go with each other. It's color coordinated and laid out to easily make outfits that match your style and coordinate with each other.

The limit of capsules wardrobes, however, is the number of items. Basically, it's too basic. There's not enough options. Even me, with my not-so-large wardrobe, I have more options to choose from than a basic capsule.

While it's a very cool concept, I don't want to spend time sewing something that's boring, or disappears into my other clothes and isn't worth the planning and sewing effort.

So, my solution? A 3D Capsule wardrobe. I was inspired by the Sudoku style capsule wardrobes where you have each box be an item and the items next to it build the wardrobe (for a more thorough explanation of this, read the CSC article, here).

A 3D Capsule is different than a standard one because the idea is that each box isn't a specific item, but instead a specific style of item. For example, instead of having a pair of jeans be in the box, the box represents the style of jeans, and I can have several different jeans that fit in the spot. Another box could be fitted woven tops. In that box, I could put several different shirts, all of them fitted woven tops that fit the color scheme.

I call it 3D because it's like it's file drawer and the drawer is labeled with what kind of item it is, but you can pull it out and find several different options behind it. Even with only a couple options in each style box, it would immensely increase the number of options that could be made by one capsule.

Capusle Wardrobe Basic Grid
Capusle Wardrobe Basic Grid

As I was thinking about what I reach for in the morning, I realized that I do have a "uniform" of sorts. Nothing formal, of course, I work in a pretty casual office, but  a uniform in the sense that I tend to most often wear items that are a similar style.

For example, my office allows jeans, so I wear jeans every day. Then, I grab a top that is either a nicely fitting knit shirt (nothing baggy here!), or a slightly more fitted, but still comfortable top. I don't wear boxy things, or loose things. I very rarely wear skirts, and never dresses.

Since intention in my sewing and wardrobe is a focus for me this year, I wanted to start planning my sewing to include only items that fit my style and went together. Combining these ideas, I created my 3D Capsule idea.

Below is my Every Day plan. It's what I am  already most comfortable in and what I wear the most, style-wise.

My Every Day 3D Capsule Plan
My Every Day 3D Capsule Plan

This grid gives me flexibility to include many different styles, but still gives a guideline for what I can and should be focusing on that will get worn and loved. When I'm thinking about buying a new pattern, I can decide if it fits in one of these categories. Doesn't fit? Don't buy it. It means I can start developing TNT patterns and then variations on those patterns, so I can explore new techniques without feeling afraid of wasting the effort. It means I can quickly find the way to know if I'm expanding my wardrobe or cluttering it.

In addition, I'll probably have a couple different 3D capsule wardrobe plans. In addition to this every day one, I'll make one that's slightly dressier, because on occasion I like to feel a little more put together. I'm considering adding a lounge one for night gowns/lounge clothes, etc., but that depends on how much sewing time I can find this year.

My next step is to do an inventory of what I wear everyday that already fits in to the grid and what I want to start sewing on. Next up, I'm going to start working this plan into the 12 week year framework to see if I can get moment up this.

2018What a year! If I had to describe 2017, I would say it was a year of hidden growth. Not pleasant, but not terrible either. It was a year of learning to move forward when many of my dreams and plans went down the toilet. As I was learning to operate through some heart-deep disappointments, I found myself not producing much. Not just in how much I sewed, but through any outlet. There wasn't many tangible things to show for 2017. That's not a bad thing; it's just how last year went.

I already feel that 2018 will be a different sort of year. I can't say exactly why, and maybe it's just wishful thinking. However, I am already thinking of this year as the year of expressing myself. I've grown so much this last year and I have so many opportunities ahead of me as a result. I'm looking forward to stepping into this year with everything I am and seeing the changes around me and in me that come from walking in a place of joy.

When it comes to my sewing, I want to intentionally focus not just on more, but on more intentional wardrobe building. I have been sewing things that are pretty, but then finding myself not wearing them because they aren't what I need for everyday wear. This year, I want to define what I'd like to wear and then sew that. For example, I often sew dresses, but don't wear them daily, so I need to quit sewing them so much. I wear pants and shirts, not even skirts generally. I want to focus on wardrobe staples that I can wear and find joy in every day.

Besides the type of item I'm sewing, I want to begin sewing connected items. Capsule-ish, but with more options. I'm calling it 3-D Capsules. It's about finding looks and colors that I enjoy and then building many options that will fit into it. I'm going to do a entire post on 3-D Capsules to explain them in more detail.

When it comes to fabric, I'm going to try to start finding more intentional joy in my choices, both to buy and use. I love fabric and I have a probably too large stash. I want to begin pulling out the quality fabric that brings me joy and giving myself permission to get rid of things that no longer are "me" or that were not what I expected when I bought them (I do a lot of online fabric shopping and sometimes it's different that what I'm anticipating.)

Here's to 2018, whatever it may bring, I hope to traverse it with grace and joy! And hopefully lots of sewing!